2011年8月12日星期五

三个月啊,该怎么熬啊!

悲剧了,又跑出去了,这回跑到惠州来了,这边一个破厂起火了,检修来了,还有,手机该怎么加图片啊,疯了,考试要挂科啦,有木有办法啊,纠结,我想我没的歇气的时候了……

2011年7月24日星期日

PCS7 V7.0 的安装

1、系统分区要求:C盘NTFS格式并且不小于20G。

2、安装Windows XP操作系统及硬件驱动程序(显卡、声卡、网卡);

3、打开控制面板(Control Panel),双击“添加/删除程序”(Add/Remove Program),在打开的窗口中选中“添加/删除Windows组件”(Add/Remove Windows Component),添加“消息队列服务”(□Message Queuing Service);

4、建议备份已经安装的操作系统。

系统调整:关闭笔记本电脑自带的无线网卡,最好将其屏蔽。

设置系统虚拟内存为实际内存的1.5倍或更高。

关闭系统的防火墙及杀毒软件。

关闭系统的屏幕保护及锁定功能。

5、安装操作系统的补丁。

在安装PCS7之前,必须首先安装SIMATIC PCS7 TOOLSET CD光盘中MICROSOFT文件夹下的

MS-HOTFIX-Q828748补丁包

SECURITYPATCH-MS03-26安全包

对于XP系统,还要安装MICROSOFTMS-FOR-STORGEPLUS-W2KXP

5、安装SQL Server 2000 + SP3程序;中途若很长时间没有反应一定要耐心等待。

在安装完SQL Server 后需要重新启动计算机,但有时在重新启动后安装PCS7时,总提醒重新启动,但重新启动后无效。这时需要手动删除注册表中的键名为:Hkey-Local-MachiaeSystemCurrentControlSETControlSEssionManagerPendingFILeRenameOperations的键

安装时建议使用安装包的方式,安装包中不包括PLSSIM,需要在下一步中手动选择。

7、以上准备工作完成后,放入PCS7 安装盘开始安装;(注:语言选择为英语,ID号在授权盘上,若计算机为工程师站,选择“□Engineering Station”及“□Process Device Manager”;若为操作员站则选择“□Single Station”,其他使用默认值。)

8、PCS7系统安装完成后(CD1~CD3),安装CD4中的仿真程序(Simulation);

9、安装CEMAT V6.0 SP2 程序,选择000;

10、将授权软盘上的授权倒入硬盘。

11、注意事项:一般情况下程序的安装使用默认路径即可,特别是CEMAT V6.0 的安装,其默认安装路径“D:CEM_V6BIN”不得修改。

12、打开控制面板(Control Panel),双击“区域设置”(Regional Setting),设置简体中文(Simple Chinese)为默认值;

13、复制光盘中的Additional_InformationPTE_ControllerCem_V6覆盖到D:Cem_V6,注册D:CEM_V6BINRegPTECtrls.bat,复制D:CEM_V6WinCCSiemens覆盖到C:Program Files

装载自:http://www.gkrs.net/a/program/2011/06_07_51.html

PCS7 V7.1 SP2 及授权文件

西门子 PCS7 V7.1 SP2 ,已经集成了SQL和WinCC安装,文件太大,现只提供种子文件,

下载后的ISO文件大概有7.7G,

下载附件解压即可获得种子文件:PCS7V71SP2

及授权文件:授权

2011年7月9日星期六

域名到期了

忙了一段时间,再回来,发现空间打不开了,原来是域名到期了,到GD续费,加另一个域名,2个一起102RMB,还不错,也蛮便宜了,RMB咋还不升值呢?貌似VPS也马上要到期了,呵呵....

前段时间,俺亲爱的来我这了,幸福了好久好久,虽然上班忙点,但是回家了有她照顾,再累也值了,慢慢的过点小日子,我喜欢,我也会为这种小日子奋斗,为此陶醉...

后面一段时间还是忙,忙着活着,绝不虚度人生,活着嘛,总要有那么一点追求的吧,呵呵..

2011年5月28日星期六

活不下去了

200块钱交了43度电,纠结,这日子没法过了,看来要响应"蛋'的号召,过节俭型生活了,以后洗澡不抹肥皂了,炒菜就炒个半熟!

多图杀猫

2011年5月7日星期六

坑爹呢,这破VMware,这破android

群里聊天聊到虚拟机虚拟android环境,一狠心,下来个android安装包,试了下,杯具了

卡这不动了,可怜我一个月2G流量,这就报废了100M去了,泪奔.....

2011年4月30日星期六

Windows 8

这个还是先装个虚拟机试试吧,我也还在下载中,速度不错哈````种子是在 Windows 8  论坛上下载的,Windows 8  论坛下载时要注册,麻烦,干脆我就共享出来了,而我这博客么又没什流量,应该不会对它成什么影响吧,哈哈....

Windows 8 Build 7850 M1种子下载


Windows_8_Build_7850_Download_(Final_M1)_6.1.7850.0.winmain_win8.6314135.TPB

Windows 8 Build 7955 M2 种子下载


6.2.7955.0.fbl_srv_wdacxml.110228-1930_x86fre_client-ultimate_en-us.iso

2011年4月29日星期五

再也不买鱼杀了

生命力如此顽强,从鱼贩子那买来,现杀,带回来,又放了半个小时,清理时还是活的,嘴巴还在动,眼睛还瞪着我,受不了,连下锅还在动,不忍心吃了,但是作为男人的尊严,还是弄成菜了,但也没胃口吃了,尝了个味,吃了小半碗饭,留着了.

自开伙2个月来,一直都是买点辣菜或者猪肉什么的炒个小炒,也算有滋有味,今天逛菜场时看到有活鱼,一时兴起,买了一条,结果没想到会是这样,以后再也不干这事了,还是安心买点猪肉什么的,唉...

2011年4月27日星期三

WPS和office不兼容啊,害死我了

最近一直在忙着做资料,在家用WPS,在公司就用OFFICE,开始还没感觉什么,后面慢慢发现了有点点不兼容,就是排版后总是被打乱,郁闷,做点东西容易吗,总是要重新排版,那个累呀,看来只能用OFFICE了,等WPS再成熟点再考虑吧,累死了,洗澡睡觉觉咯```

2011年4月18日星期一

偷得浮生半晚闲

好舒服啊,好久没6点前下班了,好久没12点前睡觉了,今天晚上一定要早睡早起,还要刮刮胡子!

搞搞卫生,听听歌,悠闲的人生呀,最近这么累,老婆也不多关心关心我,哼哼,等我见到你了好好收拾你,还要可怜的老公自己洗衣服,多心疼啊,我都不忍心了,而后刚刚又给老弟200块钱,说是买衣服,希望真去买衣服了,泡网吧被我发现了就剁了他的手,毕竟读书不是在玩,也想过买本本给他,但是给那厮买电脑,那绝壁是害了他.

也许还会忙一阵,也许会闲下来,但是听说刘德华要去长沙开演唱会,期待呀,如果得空,一定要去听听,说不定还能搞个签名么么的,嘿嘿........

2011年3月15日星期二

回家了

终于回湖南了,回来忙碌一阵,看了看老婆,找了找房子,买点东西云云,经过了一个多月没网络的日子,最近才有空去开网络,郁闷的是和同事一起去办的无线网卡,结果我的是坏的,他的可以用,让他得瑟了一晚上。

上班依然还是原来老样子,只是我回来,老爸老妈都出去了,一个去台湾,一个去广州了,感觉这个家呀,无言.....

老婆除了在读研还要教书,也是忙的不可开交,心疼,又没办法,等过了这两年就好了,辛苦老婆了.......

博客一度荒废,以后可能还会持续一段时间,因为我也要考试了,充电中.....

生活从来都是不易的.........

2011年2月3日星期四

新年快乐

新年到,(此处略省10000字).
最后,祝福大家新年快乐,合家欢乐,事业更上一层楼!

2011年1月30日星期日

我可怜又可叹的肚子.....

不知不觉间,过了一年,不知不觉间发现体重又往上飙了一截,公司好不容易发件羽绒服,结果领回来一试,乖乖,想象下电视里那些女的穿束腰装时的情景,真是一模一样,好不容易塞进去吧,肩膀也张不开,肚子挺起比起同事老婆8月怀胎的都绰绰有余,总之一句话,穿着就是一个另类啊,照照镜子,脸都长成方型的,再长就成木瓜型了,啊!还有何面目回家啊.想当年120的标准身材,那个肌肉,那个曲线,迷的我老婆晕忽忽的,现在,全玩完了,和洪金宝一个德行了,再一个多月就要调回去了,争取减点肥,争取不逛超市,争取逛超市也不买零食,看着前天才去超市买的零食,那个纠结啊,吃完再减肥,回家也好对老婆交代呀..........

2011年1月26日星期三

西门子 SIPART PS2 电气阀门定位器 操作手册


目录

1 安全信息.......................................................................................................... 1

1.1 术语含义.......................................................................................................... 1

1.2 前言................................................................................................................ 1

2 定位器的供货范围.............................................................................................. 3

3 组装.............................................................................................................. 4

3.1 概述............................................................................................................... 4

3.1.1 定位器在潮湿环境中的使用............................................................................................ 4

3.1.2 定位器在易受到强加速作用力或振动场合的使用.................................................... 5

3.2 6DR4004-8V 和6DR4004-8L 直行程执行器额外的附件......................................................... 6

3.2.1 组装顺序............................................................................................................ 6

3.3 6DR4004-8D 转角执行器额外的附件.............................................................................. 9

3.3.1 组装顺序.................................................................................................................. 9

4 可选件的安装...................................................................................................................... 11

5 电气连接...........................................................................................................................12

6 气动连接............................................................................................................................13

6.1 注入仪表空气开关(仪表内部)....................................................................................14

6.2 限流器...........................................................................................................................14

7 调试(见散页“操作-简要说明”) ...........................................................................................15

7.1 直行程执行器调试准备....................................................................................................15

7.1.1 直行程执行机构的初始化.......................................................................................16

7.1.2 直行程执行器手动初始化......................................................................................17

7.2 角行程执行器调试准备..................................................................................................18

7.2.1 角行程执行机构的自动初始化..........................................................................19

7.2.2 角行程执行机构手动初始化................................................................................. 20

7.3 复制初始化数据(定位器置换)..................................................................................... 21

7.4 故障校正........................................................................................................................... 21

7.5 阀门定位器简明操作指南.................................................................................................. 24

附录SIPART PS2 6DR5xxx-xx 散页“操作—简要说明” ......................................................... 26

附录...............................................................................................................28

目录1 安全信息................................................................................................ 11.1

术语含义................................................................................................................. 11.2

前言................................................................................................................. 12

定位器的供货范围................................................................................................ 33

组装........................................................................................................................... 43.1

概述.............................................................................................................. 43.1.1

定位器在潮湿环境中的使用.................................................................................... 43.1.2

定位器在易受到强加速作用力或振动场合的使用..................................................................... 53.2 6DR4004-8V 和6DR4004-8L 直行程执行器额外的附件..................................................................... 63.2.1

组装顺序..................................................................................................... 63.3

6DR4004-8D 转角执行器额外的附件................................................................................................. 93.3.1

组装顺序.............................................................................................. 94

可选件的安装....................................................................................................................... 115

电气连接..............................................................................................................................126

气动连接.................................................................................................................136.1

注入仪表空气开关(仪表内部)................................................................................146.2

限流器.........................................................................................................147

调试(见散页“操作-简要说明”) ................................................................................157.1

直行程执行器调试准备................................................................................................157.1.1

直行程执行机构的初始化.............................................................................167.1.2

直行程执行器手动初始化................................................................................177.2

角行程执行器调试准备.........................................................................................187.2.1

角行程执行机构的自动初始化........................................................................197.2.2

角行程执行机构手动初始化............................................................................. 207.3

复制初始化数据(定位器置换)............................................................................... 217.4

故障校正.................................................................................................................... 217.5

阀门定位器简明操作指南.............................................................................................. 24

附录SIPART PS2 6DR5xxx-xx 散页“操作—简要说明” ........................................................ 26

附录......................................................................................................28

操作手册下载:西门子

2011年1月19日星期三

史上最无聊游戏

这个是史上最无聊的游戏,有100%不相信他是最无聊的,99%的人打开后会玩它,98%的人玩了一次后还会继续....

2011年1月12日星期三

Process Gas Chromatograph PGC2000 COMMAND TREE

点击图片查看大图.


COMMAND TREE

The menu system (command tree) branches out from general to specific topics, eventually leading you to a screen that allows you to view or edit the desired parameters.  The soft key selections move you down the command tree one level at a time.  Figure 3-8 shows the command tree.

BACKGROUND

EXIT TO COMMANDS

MANUAL CONTROL

CURRENT

REPORT,

BASIC I/O

& OPTIONS

ALARMS

ANALYSIS CONTROL

REPORTS

TABLE EDIT

PRINTER

STORAGE

& CONFIG.

NAMES

MISC.

TESTING/SETUP

PRINTER REPORT TYPE VIEW REPORT ANALOG DIGITAL HOST

TEST PRINTER

PRINT TABLES

REQUEST ANALYSIS STREAMS START/STOP ANALYSIS

METHODS OTHER TABLES

PRINT SIM DIS TABLES UPDATE DIGITAL CONFIG.

SAVE OR RESTORE TABLES

CONTROL

PARAMETERS

TIME AND DATE

CHROMATOGRAM STORAGE

VISTANET TABLES

VISTANET

AND COMMANDS LOG IN/OUT DETECTOR & GRAPHICS

MANUALLY ZERO BASELINE PRESS. & TEMP

CONTROL

CURRENT REPORT BASIC INPUT AND OUTPUT

START/STOP AND EDIT BASIC OPTIONS

CLEAR ALARMS & WARNINGS

NAME HEADERS NAME SENSORS & BASIC

NAME STREAMS DIAGNOSTIC TESTS HARDWARE SETUP STATUS DISPLAY DISPLAY SAVED DATA REPROCESS SAVED DATA DEFINE SAVE AND RELEASE

TREND TABLE TIME TABLE DIGITAL TABLE RANDOM STREAM TABLE

VISTA BASIC PROGRAM

CHROMA BOARD 1 DIGITAL BOARD 1 DIGITAL BOARD 2 CHROMA BOARD 2

OTHER

MEMORY USED GRAPHICS REPORT TO PRINTER

TEMP  MANUAL TEMPERATURE CONTROL

CONTROL  VIEW ALARMS

MANUAL PRESSURE CONTROL

PRES CONTROL  PRESSURE CONFIG

VIEW ALARMS

ZONE CONFI

TEMP CONFIG  NAMES AND LIMITS

CONTROLLER TYPE

Figure 3-8. COMMAND TREE

2000-OSM, F1

COMMAND TREE The menu system (command tree) branches out from general to specific topics, eventually leading you to a screen that allows you to view or edit the desired parameters.  The soft key selections move you down the command tree one level at a time.  Figure 3-8 shows the command tree. BACKGROUND
EXIT TO COMMANDS MANUAL CONTROL CURRENT REPORT, BASIC I/O & OPTIONS


ALARMS
ANALYSIS CONTROL REPORTS TABLE EDIT PRINTER STORAGE & CONFIG. NAMES MISC. TESTING/SETUP PRINTER REPORT TYPE VIEW REPORT ANALOG DIGITAL HOST TEST PRINTER PRINT TABLES
REQUEST ANALYSIS STREAMS START/STOP ANALYSIS
METHODS OTHER TABLES PRINT SIM DIS TABLES UPDATE DIGITAL CONFIG. SAVE OR RESTORE TABLES CONTROL PARAMETERS
TIME AND DATE CHROMATOGRAM STORAGE VISTANET TABLES VISTANET AND COMMANDS LOG IN/OUT DETECTOR & GRAPHICS MANUALLY ZERO BASELINE PRESS. & TEMP CONTROL CURRENT REPORT BASIC INPUT AND OUTPUT START/STOP AND EDIT BASIC OPTIONS CLEAR ALARMS & WARNINGS


NAME HEADERS NAME SENSORS & BASIC

NAME STREAMS DIAGNOSTIC TESTS HARDWARE SETUP STATUS DISPLAY DISPLAY SAVED DATA REPROCESS SAVED DATA DEFINE SAVE AND RELEASE
TREND TABLE TIME TABLE DIGITAL TABLE RANDOM STREAM TABLE VISTA BASIC PROGRAM CHROMA BOARD 1 DIGITAL BOARD 1 DIGITAL BOARD 2 CHROMA BOARD 2 OTHER MEMORY USED GRAPHICS REPORT TO PRINTER TEMP  MANUAL TEMPERATURE CONTROL  CONTROL  VIEW ALARMS  MANUAL PRESSURE CONTROL  PRES CONTROL  PRESSURE CONFIG  VIEW ALARMS  ZONE CONFI  TEMP CONFIG  NAMES AND LIMITS  CONTROLLER TYPE

Figure 3-8. COMMAND TREE 2000-OSM, F1

2011年1月3日星期一

Benchmark Run

Benchmark Run
Benchmarks are periodic tests used to ensure the analyzer is functioning properly. If you perform a
benchmark of each applicable method at the end of start-up, this will provide a reference for later
benchmarks. In order to do benchmarks, the benchmark concentrations must be entered into the Component Definition screen and the benchmark stream must be defined (see "Preparing a Method
Table" in Section 4).
To run a benchmark test:
1. On the Background screen press the F1 (Exit to Commands) soft key.
2. On the Commands screen cursor to TABLE EDIT and then press the F2 (Methods) soft key.
3. The Method Table #?? screen will appear. Use the number keys on the GCC front panel to enter
the number of the method to benchmark. When the desired number appears on the screen,
press the F2 (Edit The Table) soft key.
4. The Cal Define & Cycle Time screen will appear. Note the benchmark stream number that
appears on the Benchmark Stream line.
5. Press the F1 (Continue) soft key.
6. When the next Method Table screen appears, press the F1 (Exit) soft key, then press the F1
(Escape) soft key.
7. When the Commands screen appears, cursor to ANALYSIS CONTROL and then press the F2
(Request Analysis) soft key.
8. On the Request Analysis screen select the method number to be benchmarked.
9. Place the cursor on “Bench” and then press the F2 (Accept The Request) soft key.
10. Press the F1 (Escape) soft key to return to the Commands screen.
11. If the analyzer is running, go to step 14. If the analyzer is stopped, go to step 12.
12. On the Commands screen press the F4 (Start/Stop Analysis) soft key.
13. On the Start/Stop Analysis screen press the F2 (Start Analyzer) soft key. The controller will
perform the benchmark as soon as all other requests have been completed.
14. Press the F1 soft key as necessary to return to the Background screen.
15. Watch the screen to determine when the benchmark stream (noted in step 4) has purged and
starts the benchmark.
16. Press the F3 (Current Report, Basic I/O, and Options) soft key.
17. On the Report, Basic I/O and Options screen, cursor to CURRENT REPORT, if necessary, and
press the F2 (View Current Report) soft key. The desired report will display at the end of the
benchmark run.
18. When the report is complete, press the F1 soft key as necessary to return to the Background
screen. The analyzer will continue to run as directed by the Stream Assignment Table unless it is
stopped by the operator.
19. To stop the analyzer press the F1 (Exit to Commands) soft key.
20. On the Commands screen, cursor to ANALYSIS CONTROL, if necessary, and press the F4
(Start/Stop Analysis) soft key.
21. On the Start/Stop Analysis screen, cursor to “At End of Analysis?” and then press the F2 (Stop
Analyzer) soft key.
22. Press the F1 soft key as necessary to return to the Background screen.
TCD Zero Adjust (Filament TCD Only)
To adjust the Thermal Conductivity Detector (TCD) zero, perform the following steps:
1. On the Background screen press the F2 (Manual Control) soft key.
2. On the Manual Control Mode screen press the F2 (Detector and Graphics) soft key.
3. On the Chroma Board screen press the F3 (Manually Zero Baseline) soft key. The Detector
Reading should change to a value of 2.00 mV ± 0.05 mV.
4. Note the readings (on the Chroma Board screen) for Hardware Zero, Software Zero, and Detector
Reading values.
5. Open the Controller front door.
6. Locate the TCD Amplifier PCB on the left side wall of the GCC and remove the plug covering the
Zero Adjust Potentiometer (see Figure 2-16).
7. Adjust the Zero Adjust potentiometer until the Detector Reading is equal to the sum of the
Hardware Zero and Software zero values noted in step 4.
8. Press the F3 (Manually Zero Baseline) soft key and recheck the readings. The detector is
adequately zeroed when the Hardware Zero percentage is less than 10%.
Stopping the Analyzer
To stop the analyzer perform the following steps:
On the Background screen press the F1 (Exit to Commands) soft key.
2. On the Commands screen cursor to ANALYSIS CONTROL, if necessary, and then press the F4
(Start/Stop Analysis) soft key.
3. On the Start/Stop Analysis screen, verify that the highlighted area is on "At End of Analysis?" and
press the F2 (Stop Analyzer) soft key. The analyzer will stop at the end of the analysis.
Press the F1 soft key as necessary to return to the Background screen.


Checking Calibration
If you have a calibration run specified for your analyzer, request a calibration run and compare the
results with those in the Data Package. To do this perform a single calibration run

1. On the Background screen press the F1 (Exit to Commands) soft key.
2. On the Commands screen cursor to ANALYSIS CONTROL, if necessary, and then press the F2
(Request Analysis) soft key.
On the Request Analysis screen (see Figure 3-5) select the method number to be calibrated.
4. Place the cursor on “Cal” and press the F2 (Accept The Request) soft key.
5. Press the F1 (Escape) soft key to return to the Commands screen.
6. On the Commands screen press the F4 (Start/Stop Analysis) soft key.
7. On the Start/Stop Analysis screen press the F2 (Start Analyzer) soft key. The controller will run
the calibration when all other requests have been completed.
8. When the calibration run is complete, verify that the Commands screen is displayed and then
press the F4 (Start/Stop Analysis) soft key.
9. On the Start/Stop Analysis screen, cursor to “At End of Analysis?” and then press the F2 (Stop
Analyzer) soft key.
10. Press the F1 soft key as necessary to return to the Background screen.
11. On the Background screen press the F3 (Cur Report, Basic I/O & Options) soft key. The screen
will display the current report. The analyzer will run the calibration when it clears other requests
and the report will appear on the screen as it happens.
12. When you have completed the calibration test, press the F1 soft key to return to the Background
Screen.
Checking Streams
To verify the operation of each stream, perform a single analysis on each one, as follows:
1. On the Background screen press the F1 (Exit to Commands) soft key.
2. On the Commands screen cursor to ANALYSIS CONTROL, if necessary, and then press the F3
(Streams) soft key.
3. On the Stream Assignment screen, determine which streams are active. Then press the F1 (Exit)
soft key to return to the Commands screen.
4. On the Commands screen press the F2 (Request Analysis) soft key.
5. On the Request Analysis screen (see Figure 3-5), select the stream number to be analyzed.
6. Place the cursor on “Stream” and then press the F2 (Accept The Request) soft key.
7. Press the F1 (Escape) soft key to return to the Commands screen.
8. On the Commands screen, press the F4 (Start/Stop Analysis) soft key.
9. On the Start/Stop Analysis screen press the F2 (Start Analyzer) soft key. The controller will start
the analysis on this stream when all other requests have been completed.
10. Press the F1 soft key as necessary to return to the Background screen.
11. Watch the screen to determine when the selected stream has purged and is starting its analysis.
12. Press the F3 (Cur Report, Basic I/O, & Options) soft key.
13. On the Report, Basic I/O and Options screen, cursor to CURRENT REPORT, if necessary, and
press the F2 (View Current Report) soft key. The desired report will display at the end of the
analysis.
14. When the report is complete, press the F1 soft key as necessary to return to the Background
screen.
15. To repeat the process for remaining streams or to rerun this stream, repeat steps 1 through 14.
16. When checkout is complete press the F1 soft key to return to the Background screen.

2011年1月2日星期日

WordPress指定分类首页隐藏及指定分类feed隐藏

很久没折腾博客了,新年来了终于能放松下了,换了个主题,折腾了下,一直想在博客里放点专业上的东西,但是又不想在首页及feed里显示,最近,终于被我折腾出来了,一个非常实用的插件Front Page Excluded Categories隐藏你不想在首页显示的分类,
首先在插件管理里查找:Front Page Excluded Categories ,安装,启用,然后编辑插件,在
front_page_excluded_cats.php
里找到
$cats_to_exclude
将后面的数字改为你希望不在首页显示的分类的ID,设置完成.
这个插件启用后首页不显示你选择分类下的文章,在分类目录下依然可以找到,google及baidu等依然可以找到,但是订阅依然可以找到,所以,还得解决订阅问题,所以,这个时候就得改模版了,在皮肤模版下 functions.php 里的


后面加入如下代码就好


function excludeCategory($query) {
if ($query->is_feed || $query->is_home) {
$query->set('cat','-3');
}
return $query;
}
add_filter('pre_get_posts','excludeCategory');


其中('cat','-3'里面的3改为你想隐藏的分类ID.就完美实现隐藏了,然后新开个页面,调用隐藏的文章,推荐插件Show Posts By Selective Category(页面选择性显示分类文章) 一切OK~
例:http://ttkea.com/?p=424 是不是在首页和feed里没有~

新年新气息

首先祝兄弟姐妹们新年快乐,2010年过去了,都说本命年命背,好不凄然,人背时和凉水都塞牙,经过1年的折腾,终于2011了,虽然马上就2012了,呵呵,终于要回家了,经过前断时间的闹腾,公司领导终于"痛下决心"放我回去了,不容易呀,过完年就回,激动人心呀.
在旧的一年里,什么所谓的好事糗事都做过,感觉那个人根本就不可能是我,我不该仅仅只是这样,太愚蠢,太无知,我也有目标,也有追求,新的一年里,重新立志,重新标榜!